Description:
Power over Ethernet (PoE) is a technology that powers a remote Ethernet device by transferring electrical power over the same standard twisted-pair Ethernet cable that is used to also send Ethernet data communications. A PoE injector (or PoE adapter) is the Power Sourcing Equipment (PSE) that supplies power into the Powered Device (PD), in this case a Trango radio, while simultaneously passing Ethernet data traffic through the same cable.
Information
- Output Voltage : 18V
- Output Current : 1A
- Input Voltage : AC100~240V
- Input Frequency : 47~63Hz
- Input Current : 0.45A Maximum
- Inrush Current : 20A Maximum
- Line Regulation : 5% Maximum
- Load Regulation : ±5%
- Ripple & Noise : 250mV Maximum
- Leakage current : 0.5mA Max
- Efficiency : 78% Typical
- MTBF : 20000H(at 25℃)
- Over-Voltage Protection : Auto Recovery
- Short-circuit Protection : Auto Recovery
- Operating Temperature : 0~40℃
- Relative Humidity : 20%-80%
- Storage Temperature : -10~+70℃
- Safety : CE
- EMC (EMI/EMS) : EN55022(EN61000-3-2,EN61000-3-3)EN55024(IEC61000-4-2,IEC61000-4-3,IEC61000-4-6,IEC61000-4-8,IEC61000-4-11)